Receivers compatible with both the manual and automatic protocols:

These modules respond to both the manual and automatic protocols, and can be controlled by transmitters from any of the HomeEasy ranges.

The 433Mhz RFXCOM transmitter (version 0x0A or higher) can be used to control these devices from a PC using the manual protocol. If the version number is 0x10 or higher, then commands can be sent using the automatic protocol too. Note that to set a dimmer directly to a specific brightness level, the automatic protocol must be used.

HE302
On/Off Socket

HE304
On/Off Ceiling Module

HE202
Dimmable Socket

HE203
Switch Converter

HE204
Ceiling Dimmer

HE205
Bulb Holder

HE208
Ceiling Rose

Receivers compatible with the automatic protocol only:

These modules from the

Ultimate range are compatible only with the automatic protocol, and therefore cannot be controlled by the HE200 Timer Remote, or the HE403 Outdoor PIR.

HE106
Door Lock

HE107
1-Gang Dimmer

HE108
2-Gang Dimmer

Receivers compatible with the heating protocol only:

The HE105 Heating Controller only responds to messages sent by the HE100 Master Remote. 
To send these messages from a PC, an RFXCOM transmitter version 0x11 or higher is required.

HE105
Heating Unit

Transmitters that use the manual protocol:

These transmitters can operate any HomeEasy receiver except those from the Ultimate range.

Messages from the transmitters can be picked up by any 433Mhz RFXCOM receiver that can also receive Domia Lite. They are mapped to X10 house and unit codes and appear in xPL as x10.basicmessages.

HE200
Timer Remote

HE403
Outdoor PIR

Transmitters that use the automatic protocol:

These transmitters can operate all HomeEasy receivers from any range..

The HE100 Master Remote also sends messages in a custom format for the HE105 Heating Controller.

HE300
On/Off Remote

HE301
Keyfob Remote

HE303
Indoor PIR

HE305
Magnetic Switch

HE307
1-Gang Switch

HE308
2-Gang Switch

HE401
1-Gang Outdoor Switch

HE402
2-Gang Outdoor Switch

HE100
Master Remote